《Investigations of a new free piston expander engine cycle》

  • 来源专题:广州能源研究所信息监测
  • 编译者: giecinfo
  • 发布时间:2016-04-14
  • This work examines the design and operation of a new, small-scale FPE (Free Piston Expander) engine that operates using low temperature waste heat sources to produce useful power output. The FPE is based on a sliding-piston architecture that eliminates challenges associated with MEMS-based rotating systems. A nonlinear lumped-parameter model is derived to study the factors that control the performance of the FPE engine and its unique operating cycle. This basic analysis considers a closed cycle operation of the FPE with low thermal or heat inputs and dimensions on the order of several millimeters. Key system design and operating parameters such as piston mass, external load, and heat input are varied to identify conditions and trends for optimal performance. The model indicated the pressure-volume diagram resembles a constant pressure cycle for a certain set of operating conditions but is also condition dependent. Increased heat inputs to the FPE reduced the engine natural or operating frequency while increasing the power output. Thermal efficiencies of the FPE are shown to be predictably low, on the order of 0.2% due to the small heat input and operating temperature gradients associated with waste heat. Key design features are identified that reveal FPE efficiency, operating frequency, and output power are dependent on piston mass, external load, input heat-rate, and duration of heat input.

相关报告
  • 《Expansions for the radiation impedance of a rectangular piston in an infinite baffle》

    • 来源专题:水声领域信息监测
    • 发布时间:2016-11-14
    • Relatively compact analytical expressions in the form of fast-convergin g expansions are derived for the radiation resistance and reactance of a rectangular rigid piston in an infinite rigid baffle, which are computationally efficient at high frequencies or large aspect ratios and yield simple approximations (asymptotic expressions) at low frequencies. Plots of the normalized radiation resistance and reactance are shown for various aspect ratios with constant width as well as constant area. Comparisons are also made with the impedance of an elliptic piston.
  • 《The Promise of a New Access-to-Capital Model | Production Machining》

    • 来源专题:智能制造
    • 编译者:icad
    • 发布时间:2024-01-05
    • Automation & Robots Published1/9/2024 The Promise of a New Access-to-Capital Model . A free online loan prequalification tool currently offered in Colorado with the potential for introduction to other U.S. markets can enable manufacturers to more easily finance new technologies including automation equipment.#columns Tim HeatonPresident Colorado Advanced Manufacturing Association Share. Read Next . Lessons from a Machine Shop Literally on the Move. Pursuit of Parts Collector Spearheads New Enterprise. How Small Machine Shops Can Fight Supply Chain Problems. Manufacturers must automate and advance if they are to meet customer needs and create jobs. An online loan prequalification tool available through the Colorado Advanced Manufacturing Association can facilitate those efforts for companies in that state. (Photo credit: PM) The Colorado Advanced Manufacturing Association (CAMA) has launched a no-fee digital platform that streamlines, simplifies and expedites access to capital for small manufacturers, supporting job growth and economic development in a challenging market environment. The new loan prequalification tool, which is being piloted in Colorado before being introduced in other U.S. markets and industry sectors, was developed by Austin-based Access Capital Technologies, the digital arm of ACTCapital, a nonprofit organization serving community lenders and their small business and start-up clients nationwide. Featured Content . What Is Trochoidal Turning? How Might Shops Benefit From It? Machine Tool Search Made Easy Video: Why a Production Machine Shop Started a Baseball Bat Company Manufacturers must automate and advance if they are to meet customer needs and create jobs. However, financing new technologies amid rising interest rates is challenging. This new access-to-capital tool matches the manufacturer with the most suitable lender, taking time and guesswork out of the loan search process while enabling businesses to spend more time building their products. Through our CAMA website, Colorado’s? small manufacturers can access the user-friendly platform operated by ACTCapital. After answering a few essential questions, the program will match the manufacturer with the specific lending programs that will meet its needs. The manufacturer is in charge of the process and can select to which institutions it would like ACTCapital to refer its application. This process takes the guesswork out of the loan search process, enabling the manufacturer to spend more time building products. FirstBank, Key Bank and DreamSpring are among the community lenders partnering with CAMA to launch the initiative, noting that the new tool assists their organizations in supporting Colorado’s smaller manufacturing businesses. This new loan prequalification tool is being piloted in Colorado before being introduced in other U.S. markets. One of CAMA’s trusted Banking Partners is FirstBank. Kristen Bernhardt, president of FirstBank’s Northwest Market and a CAMA board member, says the company knows that manufacturers are vital to the U.S. economy, but they often deal with workforce and capital challenges. “We look forward to helping them find solutions to efficiently operate and grow their business and see the access-to-capital program as one of several ways we’re able to accomplish that,” she explains. Edmond Johnson, CMMA member and president and CEO of Premier Manufacturing, brings a new source of funding to Colorado manufacturers. Johnson is also the board chair of DreamSpring, one of the country’s top micro lenders. He believes the collaboration between CAMA and DreamSpring will result in many micro- and small-business manufacturers gaining access to capital — money they can use to advance technology-driven manufacturing in their facilities. Luther Branham, co-founder and managing director of ACTCapital, says this new access-to-capital platform can cut costs for new customer loan origination by nearly 70% and reduce acquisition costs by half, while almost entirely eliminating application rejections. He notes that ATCCapital provides fast access to the best lending product, interest rates and terms through technology that is easily scalable across different organizations. “We’re launching the platform with CAMA and its lending partners and will be adding more industry sectors and programs that support small businesses as we grow, focusing on underserved and often overlooked markets and communities across the United States,” Branham explains. This tool is an exciting first step in helping Colorado’s manufacturers digitize and transform their operations. Interest rates, however, will continue to make it difficult for manufacturers to borrow the funds to pay for these advancements. Recognizing this, CAMA is already working with ACTCapital to launch Phase Two of this access-to-capital tool. Phase Two, to be launched in early 2024, will include: An interest rate buydown program for CAMA members to make loans more affordable in a rising interest rate environment, and;. A small grant program to help offset any upfront costs on loans. . Automation is no longer a luxury for the few. With the 4th industrial revolution, automation is necessary for even the smallest manufacturers. CAMA hopes this tool will keep manufacturers in Colorado, and eventually across the country, competitive and profitable well into the future. About the Author. Tim Heaton. Tim Heaton is the President of Colorado Advanced Manufacturing Association. Landscape Photo Credit: PM RELATED CONTENT. What Is The Best Bar Feed System For Production Turning? . Selecting the right bar feeder can be one of the most important decisions a shop can make. Bar feed systems help improve productivity, throughput and quality, but in order to achieve the most benefit from them it is essential that a bar feed system be matched to the particular needs of the turning operation. Automating CNC Lathe Part Loading/Unloading . Read about how you can automate the loading/unloading of your CNC lathes to reduce the labor cost on longer running jobs. Choosing an Automatic Bar Feeder . The bar feeder is the most common form of automation for turning operations. Selecting the right one requires consideration of the applications for which it will be used. .