《Estimation and simulation of multi-beam sonar noise 》

  • 来源专题:水声领域信息监测
  • 编译者: ioalib
  • 发布时间:2016-03-16
  • Methods for the estimation and modeling of noise present in multi-beam sonar data, including the magnitude, probability distribution, and spatial correlation of the noise, are developed. The methods consider individual acoustic samples and facilitate compensation of highly localized noise as well as subtraction of noise estimates averaged over time. The modeled noise is included in an existing multi-beam sonar simulation model [Holmin, Handegard, Korneliussen, and Tjøstheim, J. Acoust. Soc. Am. 132, 3720–3734 (2012)], resulting in an improved model that can be used to strengthen interpretation of data collected in situ at any signal to noise ratio. Two experiments, from the former study in which multi-beam sonar data of herring schools were simulated, are repeated with inclusion of noise. These experiments demonstrate (1) the potentially large effect of changes in fish orientation on the backscatter from a school, and (2) the estimation of behavioral characteristics such as the polarization and packing density of fish schools. The latter is achieved by comparing real data with simulated data for different polarizations and packing densities.

相关报告
  • 《Circular synthetic aperture sonar imaging of simple objects illuminated by an evanescent wavefield》

    • 来源专题:水声领域信息监测
    • 编译者:ioalib
    • 发布时间:2016-11-10
    • This paper is motivated by the case where an underwater object located within the sediment is illuminated by a grazing acoustic beam below the critical angle. The included experimental work uses a liquid−liquid interface and vertically inverted geometry as a stand-in for the water−sediment boundary. In the super-critical regime sound in the water column refracts into the sediment before scattering. However, for sub-critical illumination a rapidly decaying evanescent wavefield is generated in the sediment near the water−sediment interface. For compact objects located in the sediment near the interface this can result in strong backscattering signals suitable for acoustic image reconstruction using synthetic aperture sonar techniques. Certain properties of the evanescent wavefield such as the vertical phase-locking behavior, the rapid amplitude decay with distance from the interface, and the low-pass filter effect have understandable ramifications for the image formation process and for characteristics of the reconstructed image. In particular, circular imaging techniques require correct placement of the imaging plane to properly focus an object; however, for backscattering (monostatic) evanescent image formation the imaging plane may be placed at the interface and the target will remain in focus regardless of burial depth. A laboratory experiment using simple scatterers is presented.
  • 《Laser beam shaping for enhanced Zero-Group Velocity Lamb modes generation》

    • 来源专题:水声领域信息监测
    • 发布时间:2016-11-14
    • Optimization of Lamb modes induced by laser can be achieved by adjusting the spatial source distribution to the mode wavelength (λ). The excitability of Zero-Group Velocity (ZGV) resonances in isotropic plates is investigated both theoretically and experimentally for axially symmetric sources. Optimal parameters and amplitude gains are derived analytically for spot and annular sources of either Gaussian or rectangular energy profiles. For a Gaussian spot source, the optimal radius is found to be λ ZGV/π. Annular sources increase the amplitude by at least a factor of 3 compared to the optimal Gaussian source. Rectangular energy profiles provide higher gain than Gaussian ones. These predictions are confirmed by semi-analytical simulation of the thermoelastic generation of Lamb waves, including the effect of material attenuation. Experimentally, Gaussian ring sources of controlled width and radius are produced with an axicon-lens system. Measured optimal geometric parameters obtained for Gaussian and annular beams are in good agreement with theoretical predictions. A ZGV resonance amplification factor of 2.1 is obtained with the Gaussian ring. Such source should facilitate the inspection of highly attenuating plates made of low ablation threshold materials like composites.