《Comparative net energy ratio analysis of pellet produced from steam pretreated biomass from agricultural residues and energy crops》

  • 来源专题:广州能源研究所信息监测
  • 编译者: giecinfo
  • 发布时间:2016-04-07
  • A process model was developed to determine the net energy ratio (NER) for the production of pellets from steam pretreated agricultural residue (wheat straw) and energy crops (i.e., switchgrass in this case). The NER is a ratio of the net energy output to the total net energy input from non-renewable energy sources into a system. Scenarios were developed to measure the effects of temperature and level of steam pretreatment on the NER of steam pretreated wheat straw and switchgrass pellets. The NERs for the base case at 6 kg h−1 are 1.76 and 1.37 for steam-pretreated wheat straw and switchgrass-based pellets, respectively. The reason behind the difference is that more energy is required to dry switchgrass pellets than wheat straw pellets. The sensitivity analysis for the model shows that the optimum temperature for steam pretreatment is 160 °C with 50% pretreatment (i.e. 50 % steam treated material is blended with the raw biomass and then pelletised). The uncertainty results for NER for steam pretreated wheat straw and switch grass pellets are 1.62 ± 0.10 and 1.42 ± 0.11, respectively.

相关报告
  • 《Second-generation bioethanol of hydrothermally pretreated stover biomass from maize genotypes》

    • 来源专题:广州能源研究所信息监测
    • 编译者:giecinfo
    • 发布时间:2016-04-07
    • Twelve maize genotypes, were agronomically evaluated and their stover hydrothermally pretreated in a temperature range of 210–225 °C to assess the effects of genotype and pretreatment severity on stover recalcitrance toward bioethanol conversion. Maize genotypes exhibited significant variation for biomass yield and all agronomic evaluated, while among all cell wall constituents measured in the unpretreated stover, only ash content showed differences among genotypes. The pretreatment severities assayed impacted most stover compositional traits, and the glucose recovered after enzymatic hydrolysis displayed a similar profile among genotypes with similar genetic background. Harsher pretreatment conditions maximized the potential cellulosic bioethanol production (208–239 L/t), while the mildest maximized the bioethanol from the hemicellulosic hydrolysates (137–175 L/t). Consequently, when both pentose and hexose sugars were considered, the total potential bioethanol produced at the lowest and highest pretreatment temperatures was similar in all genotypes (292–358 L/t), indicating that the lowest temperature (210 °C) was the optimal among all assayed. Importantly, the ranking of genotypes for bioethanol yield (L/ha) closely resembled the ranking for stover yield (t/ha), indicating that breeding for biomass yield would increase the bioethanol production per hectare regardless of the manufacturing process. Similarly, the genetic regulation of corn stover moisture is possible and relevant for efficient energy production as biomass moisture has a potential impact on stover transportation, storage and processing requirements. Overall, these results indicate that local landrace populations are important genetic resources to improve cultivated crops, and that simultaneous breeding for production of grain and stover bioethanol is possible in corn.
  • 《Kinetic study of biogas production from energy crops and animal waste slurry: Effect of organic loading rate and reactor size》

    • 来源专题:生物质生化转化信息监测
    • 编译者:giecinfo
    • 发布时间:2016-03-29
    • Biogas production in agriculture is processed mostly continuously at mesophilic temperatures in completely stirred tank reactors. Therefore, reactor performance data were studied in long‐term semi‐continuous laboratory‐scale experiments with maize silage, whole‐crop rye silage and fodder beet silage as mono‐substrate and cattle slurry at mesophilic temperatures. For calculation of biogas yield as function of the organic loading rate, a hyperbolic equation was developed on the base of a first‐order reaction rate for substrate degradation. The biogas yield depends also on the maximum biogas yield, the concentration of volatile solids of the input, the density of the effluent, the density of the biogas and the reaction rate constant, which are all substrate‐ or process‐specific. Values of the theoretical maximum biogas yield and the reaction rate constant were observed in the range 0.61–0.93 m3 per kg volatile solids and 0.032 – 0.316 d−1, respectively. By means of the hyperbolic equation, the proportion of the biogas yield from the maximum can be calculated for the first and a second reactor which also depends on the volume of each reactor.